Robot Kits Order Page

BattleKits
Robot Kits Order Page

Our "basic" kits can be configured with the highest-performance motors, batteries, and speed controllers available and naturally those can be expensive. You can also choose to order your kit with our low-cost E-150 motors or with no motors at all and finish your robot using surplus motors and lower-cost batteries and speed controllers. It's up to you! See below for a table showing the weights of all the optional components.

The prices for our basic kits include the drive modules with all the drive train components, wheels, bulkheads, and base plates. All kits are shipped fully assembled and tested, (except for electrical connections).

We accept Visa, MasterCard, and PayPal.

Light Weight Kit - Base Price: $699

Middle Weight Kit - Base Price: $849


*Choose Mini Controller only if using E-150 motors. S28 motors in the Middle Weight require the larger controller.

Heavy Weight Kit - Base Price: $975

Drive Modules - Base Price: $149
Type "A" Type "B" Viewed from above

The following table lists the weight and cost of optional components to help you decide on the best configuration for your own robot:

	E-150 motor	S28-150 motor	S28-400 motor	Feather Pack Battery	MC1250 Battery	MC-545 Battery	MC-680 Battery	Mini Controller	AmpFlow Controller
Pounds	3.4	3.8	6.9	2.3	3.0	11.5	12.5	1.4	3.4
Cost	$79	$299	$359	$99	$24	$79	$69	$365	$645

The following table lists the number of each optional component that can be "bolted in" to the various basic kits without requiring any modifications to the kits or the components:

	Light	Middle	Heavy
E-150 motor	2	2-4 Note B	4 Note B
S28-150 motor	2	2-4	4
S28-400 motor	0	2-4	2-4
Feather Pack Battery	1-4	N/A	N/A
MC-1250 Battery	2	N/A	N/A
MC-545 Battery	0	2-4	2-4
MC-680 Battery	0	2 Note A	2 Note A
Mini Controller	1	1-2 Note C	N/A
AmpFlow Controller	1	1	1-2

Notes to above chart:
A. MC-680 batteries will not fit into robots with more than two motors. Use the MC-545 instead.
B. The Middle weight robot will operate marginally well with two E-150 motors - we recommend the use of four E-150 motors with the Middle weight. Heavy weight robots require four E-150 or two S28 motors. The high speed ratio is not available for use with the E-150 motors.
C. Choose Mini Controller only if using E-150 motors. S28 motors in the Middle Weight require the larger controller.

For more information, or to order individual components please visit these pages:

*   Visit the Motors page
*   Visit the Batteries page
*   Visit the AmpFlow Controllers page
*   Visit the Mini Controllers page
*   Visit the Wheels page

Replacement parts are available for all components. Contact us for pricing.